This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/AM4379: BiSS-C debug causes CCS crash

Part Number: AM4379

Tool/software: Code Composer Studio

I'm trying to setup a BiSS-C implementation from www.ti.com/.../tidep0022 on a IDK437x evaluation board and every time I try to connect to ICSS0_PRU0 while debugging my CCS crashes.

I have been trying to follow the steps listed in tidu794a on pg 34 as close as I can however they seem to be a little out of date and as such I have had to combine my existing GEL files with the BiSS example ones.

The crash seems to happen directly after I run PRU_ICSS_PRCM_Enable and then try to right click on the PRU in the debug view and connect to target.

I created a completely new project as well as a new target configuration and was able to replicate the problem.

I am running CCS 6.1.2 on ubuntu 16.04 64bit.

Any help is appreciated,

-Mike