Tool/software: Linux
Hi,
I am trying to get USB OTG working for cdc_eem USB nic. I am not really sure where to get started.
I believe I have to get the pin mux configured and the right drivers compiled into the kernel. To that extent, I've been following the page at https://elinux.org/BeagleBoardPinMux. We have a custom-built OpenEmbedded and busybox setup. We are using Linux kernel 2.6.32 with really no hope of upgrading to a later version, so there is no DTB. I haven't yet found any documentation on what drivers I need to get USB working.
Any documentation/suggestions on how to proceed would be greatly appreciated. Let me know if additional details are needed.
Thanks,
Joseph