PRUCAPE: Rev 1.2A EEPROM

Robert Sander

Prodigy 30 points

Part Number: PRUCAPE

In the Hardware User Guide it is said, "I2C SCL and SDA signals swapped (REV 1.2A)" and "The EEPROM is blank".

While I want to use the PRUCAPE with the capemanager, I need a working EEPROM with the right content.

Could you please provide a file with the needed EEPROM-content?

Best regards,

Robert

over 5 years ago

0 Biser Gatchev-XID over 5 years ago

TI__Guru**** 393215 points

Beaglebone Capes are not supported by TI. Please ask on www.beagleboard.org

0 Robert Sander over 5 years ago in reply to Biser Gatchev-XID

Prodigy 30 points

...but this special board (TI PRU Cape) is made by TI so they should support it.

Best regards
Robert

0 Michael Erdahl over 5 years ago in reply to Robert Sander

TI__Genius 13455 points

Robert,

It sounds like you're running Debian if you're using the cape manager.

Depending on your kernel version, you might be able to load one of the existing PRU cape device tree overlays manually (github.com/.../arm).

For the EEPROM contents, section 8.2.4 EEPROM Data Format of the latest BeagleBone SRM covers the EEPROM contents (github.com/.../System-Reference-Manual).

Regards,
Mike

0 Robert Sander over 5 years ago in reply to Michael Erdahl

Prodigy 30 points

Hi Michael,

thank you for the info. I will try it soon.

Regards

Robert

Processors

Processors forum

PRUCAPE: Rev 1.2A EEPROM