Part Number: EVMK2G
Tool/software: Code Composer Studio
Hi,
What should I do to convert the audioAnalogLoopbackTest project into a CCS project?
Thank you and best regards,
Adam
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: EVMK2G
Tool/software: Code Composer Studio
Hi,
What should I do to convert the audioAnalogLoopbackTest project into a CCS project?
Thank you and best regards,
Adam
Rahul,
I think you might have a different project in mind. The 2.2.4.2 section named audioAnalogLoopbackTest in the tiducr7a.pdf, which is the main documento for TIDEP-0088 reference design specifically states that "The cmb project is part of the Processor SDK RTOS package and may be used to debug the CMB board". The source code directly names this project a "unit test" for CMB HW and drivers. It has no relation to the AUDK2G daugher board that you mention.
Best regards,
Adam