CCS/TMDSEMUPROTRACE: How to use XDS560v2 PRO TRACE to monitor device

JackyXiaodong

Part Number: TMDSEMUPROTRACE

Tool/software: Code Composer Studio

Recently my company purchase an XDS560v2 PRO TRACE Receiver & Debug Probe from Spectrum Digital.

I saw on TI.coom.It said that the Trace receiver can monitor the entire device by capturing system events such as the state of processing cores, internal buses and peripherals

I confuse that how to monitor peripherals of devices on CCS,like spi or EMIF ?

I try PRO TRACE on EVMK2H, software is CCS 7.3

Does anyone has document ,example ,or videio about how to trace peripherals?

Thanks and Regards

Jacky

over 5 years ago

0 AartiG over 5 years ago

TI__Guru**** 173310 points

Jacky,

Here are some resources, documents and videos to help you get started.

For information about the different types of trace features, these videos will be helpful.

https://youtu.be/OzPRvigznP

https://youtu.be/G3noymHTvGI

Also take a look at the "System Trace" and "Processor Trace" training modules available at this link to get an idea about the differences between the two types of trace: http://processors.wiki.ti.com/index.php/CCS_Modules_Library

Additionally here are the Debug and Trace User Guide and Trace Analyzer (in CCS) User Guide:

http://www.ti.com/lit/spruhm7

http://www.ti.com/lit/spruhm4

Hope this helps!

0 JackyXiaodong over 5 years ago in reply to AartiG

Intellectual 945 points

Thank you very much

Processors

Processors forum

CCS/TMDSEMUPROTRACE: How to use XDS560v2 PRO TRACE to monitor device