The mentioned document states (table 1) that:
MCASP0_FSX is connected to PRU0 Orange LED
MCASP0_AXR0 is connected to PRU0 Green Led
Based on my tests, these are swapped, that is MCASP0_FSX => Green and MCASP0_AXR0 => Orange
Thanks
Peter
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
The mentioned document states (table 1) that:
MCASP0_FSX is connected to PRU0 Orange LED
MCASP0_AXR0 is connected to PRU0 Green Led
Based on my tests, these are swapped, that is MCASP0_FSX => Green and MCASP0_AXR0 => Orange
Thanks
Peter
1. The PDF document PRU CAPE Hardware TIDU426 from July 2014 has the following (the incorrect mapping for PRU0 Orange and Green LEDs based upon your tests):
2. The PRUCAPE schematic tidr938 has the following (the correct mapping for PRU0 Orange and Green LEDs based upon your tests):
3. The PRU Cape Hardware User Guide WikiPage has the following (the correct mapping for PRU0 Orange and Green LEDs based upon your tests):
The revision history for the WikiPage showed that in September 2015 the mapping for the PRU0 Green and Orange LEDs were corrected.
I.e. the LED mapping is incorrect in TIDU426, but has been corrected in the WikiPage.