• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 100 subscribers
  • Views 230 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RTOS/DRA787: vision SDK

user5892527
Intellectual 500 points
Part Number: DRA787

Tool/software: TI-RTOS

Our produce use DRA78x, have a 256M QSPI Flash.

Software based on vision SDK, OS is RTOS.

We need to create a FAT partition on QSPI Flash.

how to create a FAT partition?

  • 0
    TI__Mastermind 42515 points

    Hi,

    QSPI is a flat memory that is mapped to a physical address and there cannot be any partitions in QSPI memory, you can check this thread for further details:

    If you want to boot from QSPI you can check chapter "3.5 Load using QSPI" in VisionSDK_UserGuide_TDA3xx.pdf.

    Regards,

    Yordan