Part Number: TMDSDSK6416
TMDSDSK6416 input is 5V. But 3.3 V output is not coming. Moreover U7 and CT4 is producing heat. The output at CT4 is coming 0.1 V instead of 3.3 V.
Kindly suggest how to resolve this issue related to hardware.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TMDSDSK6416
TMDSDSK6416 input is 5V. But 3.3 V output is not coming. Moreover U7 and CT4 is producing heat. The output at CT4 is coming 0.1 V instead of 3.3 V.
Kindly suggest how to resolve this issue related to hardware.
Khushboo,
The is an EVM for a very old device. Is this recently purchased or one which has been in use for a very long time? Do you know what occurred coincident with the power supply failure?
Tom
Thanku for ur reply,
This is a old evm only. Till last week it was working fine. But by mistake jtag connector was wrongly connected and after that it is giving power failure.
Khushboo,
We cannot provide debugging support for this old EVM. We recommend that you purchase a replacement.
Tom