• State Resolved
  • Locked Locked
  • Replies 5 replies
  • Subscribers 101 subscribers
  • Views 239 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

OMAP5912: idle DSP on OMAP5912

OMAP5912: Difference between two versions

Liu Yang
Expert 5915 points
Part Number: OMAP5912

Hi Team,

In product page, there is no OMAP5912ZDY anymore but OMAP5912ZVL is active.
What is the difference between the two versions?

In addition, when I click the link of its datasheet it jumps to the link of "C6000 DSP + Arm processors"
where can I get the datasheet?

Beat Regards,
Tom Liu

  • 0
    TI__Mastermind 23165 points

    The ZVL package is a replacement for the ZZG package. Details can be found here.

    I'm checking to see what happened to the ZDY orderable. 

      Paul

  • 0 in reply to PaulM
    TI__Expert 5915 points

    Hi Paul,

    I think the link you send to me is broken.
    There are too many versions so my customer want to know the difference between ZDY and ZVL.

    Beat Regards,
    Tom Liu

  • 0 in reply to Liu Yang
    TI__Mastermind 23165 points

    The difference is the package.

    The ZDY is a 17x17 BGA (19x19mm). Details are in the datasheet  

    The ZVL is a 21x21 BGA (12x12mm). Details are in the OMAP59xx MicroStar BGA Discontinued and Redesigned document 

      Paul

  • 0 in reply to PaulM
    TI__Expert 5915 points

    Hi Paul,

    Thank you for your reply. Can I please confirm a couple of other questions:
    1. OMAP5912ZDY whilst it is NRND, can it still be purchased?
    2. If it can still be purchased, do you have an expected last time buy date planned?
    3. OMAP5912ZVL other than being in a different package/footprint is it otherwise equivalent to the ZDY part and will therefore not require any software changes if we were to layout the PCB to accommodate the ZVL part?
    4. Should my customer continue to use ZDY or should they switch to ZVL?

    Beat Regards,
    Tom Liu

  • 0 in reply to Liu Yang
    TI__Mastermind 23165 points

    Liu Yang said:

    Thank you for your reply. Can I please confirm a couple of other questions:
    1. OMAP5912ZDY whilst it is NRND, can it still be purchased?

    OMAP5912ZDY can still be ordered

    Liu Yang said:

    2. If it can still be purchased, do you have an expected last time buy date planned?

    I am not aware of any plan to end availability.

    Liu Yang said:

    3. OMAP5912ZVL other than being in a different package/footprint is it otherwise equivalent to the ZDY part and will therefore not require any software changes if we were to layout the PCB to accommodate the ZVL part?

    The functionality of the silicon is the same. I did a quick check of the pin maps and both utilize 289 pins which suggests all the same pin functions are available. If planning to change to the new package, a more thorough check should be done.  

    Liu Yang said:

    4. Should my customer continue to use ZDY or should they switch to ZVL?

    Given that the ZDY package is NOT EOL, unless there is another reason to update the PCB design, I see no reason to switch to the ZVL package