• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 103 subscribers
  • Views 152 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMDSCM572X: Video output format of the TMDSCM572X

UNA
Mastermind 7980 points
Part Number: TMDSCM572X
Other Parts Discussed in Thread: TMDSEVM572X,

Hi,

I would like to evaluate the video inputs using TMDSEVM572X and TMDSCM572X.
Can the TMDSCM572X output raw data (RGB888) and capture with TMDSEVM572X?


Best Regards,
H.U

  • 0
    TI__Mastermind 46722 points

    Hello H.U

    I don't quite understand the topology you're describing.  Are you asking can two EVMs be connected?  Or can the processor's VOUT interfaces loop back to the VIN interfaces?  A block diagram will help.

    Thanks,

    Kyle

  • 0 in reply to kcastille
    Mastermind 7980 points

    Hi kyle,

    I would change the way I ask the above question.

    What is the default output video format for the camera module (TMDSCM572X)?
    Is it possible to change the output video format of the camera module (TMDSCM572X) to RGB888?
    Can  TMDSEVM572X capture the RGB888 video format output from this camera module?

    Best Regards,
    H.U

  • 0 in reply to UNA
    TI__Mastermind 39570 points

    The camera module supports the OV10635 sensor.  The sensor is capable of supporting both YUV (8 or 10bit) and RAW (10 to 18bit) data output formats.  However, the camera board design supports only 8b of data (D7-D0), so D8 and D9 connections from camera are not available.  I'm not clear on what (if any) this limits the formats supported from camera.  I do not find documentation shown if all the different data formats/widths are supported on the narrow bus (8b).