This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320DM8147: Unused SPI Pins

Part Number: TMS320DM8147

Hi, I have made a design change where I no longer will use SPI2 on TMS320DM8147BCYE1. 

P26, AD28, K22, J24, K23. Is there recommended termination or just leave no-connect (floating).

Is there still the Pin Mux Utility for this part?

Thanks, Patrick