This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TDA4VM: j7-evm Dp can't display

Part Number: TDA4VM

I make an SD card according to the following website steps (linux + rtos mode),If I just do step1 and Step2, DP will be displayed when the system starts,but 

I do step1 to step4,  I run ./run_app_tidl.sh ,DP not display.

http://downloads.ti.com/jacinto7/esd/processor-sdk-rtos-jacinto7/latest/exports/docs/vision_apps/docs/user_guide/RUN_INSTRUCTIONS.html

COM16__2020-11-11_15-04-47.log

  • Hi zhang,

    This can mean that the dispay you are using does not support 1080p resolution. Can you please if display does support 1080p resolution? 

    Vision app supports output only on 1080p resolution.

    If you want to change the output resolution, as supported by your display device, please follow below FAQ.

    Regards,

    Brijesh