• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 101 subscribers
  • Views 277 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AMIC110: Available memory size for user application in DDR-less EtherCAT

Koichiro Tashiro
Mastermind 21140 points
Part Number: AMIC110
Other Parts Discussed in Thread: TIDEP-0105

Hi,

My customer is interested in DDR-less EtherCAT slave on AMIC110 (TIDEP-0105)
It seems a lot of efforts in optimization were done to put all codes inside memory.

How much memory is available for customer application?
My customer wants to use USB Bulk (device) transfer with EtherCAT.
Is this feasible without DDR or not?

Thanks and regards,
Koichiro Tashiro

  • 0
    TI__Mastermind 25464 points

    Hi
    Sorry for the late response.

    Attached is the overview of memory usage of Ethercat Slave applications on AMIC11x in release mode. You need to check if USB related can be fit in the un-used sections to keep the whole application DDR-less.

    Please note that the memory section from Cortex-M3 is included because it was unused. M3 is reserved for PM, hence it was reserved but in use-cases which does not need PM, you can use resources like memory from application.

    Regards
    Dhaval Khandla

  • 0 in reply to Dhaval Khandla
    TI__Mastermind 25464 points

    Hi
    Please let us know if there are any further questions regarding this topic.

    Regards
    Dhaval Khandla