OMAP3530: OMAP3530 Boot loader??

kevin wang1

Part Number: OMAP3530

Hi,

I am working on a board using OMAP3530. I have a question about the booting sequence.

Do I need to create a boot loader? If so, how? and where do I need to put? If not, where I can put the initial mode settings for the pins?

Thanks,

Kevin

over 3 years ago

0 Nick Saulnier over 3 years ago

TI__Guru* 83215 points

Hello Kevin,

Please note that we do not provide design support for OMAP3530 as per the product page:
OMAP3530 data sheet, product information and support | TI.com

So we will be very limited in any support we can offer on the forums.

You can find OMAP3530 software in the Design & Development section of the product page:
OMAP3530 data sheet, product information and support | TI.com
Note that some software documentation for OMAP3530 was kept on the Processors Wiki, which went offline earlier this year. If you have a specific wiki page you need to access tell me the link and I can dig it up from the archives.

Regards,

Nick

Processors

Processors forum

OMAP3530: OMAP3530 Boot loader??