TMS320DM368: NAND flash TC58BVG0S3HTAI0 get ECC failure while being programmed

ding cheng

Part Number: TMS320DM368

We try to use a new NAND flash for our DM368 board, but it fails with ECC failure while being programmed. The flash device ID: 0xF1, manufacture ID: 0x98.It is from KIOXIA, model: TC58BVG0S3HTAI0. Before this one, we have been using TC58NVG0S3ETAI0. Is this flash supported? if yes, what can we do to make it work? Thanks.

over 2 years ago

0 Ralph Jacobi over 2 years ago

TI__Guru*** 128195 points

Hello Ding,

Comparing the devices, it looks like there are slight differences in timing and there is the ECC element which has been added. I don't see either of these preventing support for that NAND flash however.

Unfortunately regarding the question about how to make it work, I don't have any guidance I can offer for that. As stated on the product page for the device, all support is through our third party partners. See the following E2E post for details.

https://e2e.ti.com/support/processors/f/791/t/813421

Processors

Processors forum

TMS320DM368: NAND flash TC58BVG0S3HTAI0 get ECC failure while being programmed