Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Part Number: AM625 Other Parts Discussed in Thread: AM3357 , , AM6442
How can I measure interrupt latency on Sitara multicore devices such as AM625 and compare the results to single core devices such as AM3357?
.
For more information on testing…
Part Number: SK-TDA4VM There are multiple instances of watchdogs on the main domain. How to enable full SoC reset upon a main domain watchdog timer expiry.
Hello,
Here is a quick look at live demonstrations on TI's Edge AI Platform shown at Electronica 2022 .
Featured Edge AI Applications in Real world enabled on TI Processors at Electronica 2022
Robotics & Automation…
Part Number: TDA4VM Other Parts Discussed in Thread: DRA821
The DDR is configured by R5 SPL/SBL. Is there a way to check the frequency of DDR from Linux at runtime?
I’m working on customer board porting, and want to know how to modify QSPI/OSPI flash layout for SPL/u-boot booting from QSPI/OSPI with TI AM64x Linux SDK.
eMMC flash and boot work as expected on AM62x-SK E2 board from Power-On-Reset (POR), but an issue as listed below is observed on AM62x-SK E2. The Issue observed After successful eMMC boot from cold POR, WARM RESET options as listed below doesn’t re-boot…
Part Number: AM625
Hi, my customer has a question about using an output from the TPS6593 PMIC + a FET to control ON/OFF for 1.8V VPP on the processor? They are trying to see if they can get by without using a dedicated LDO for 1.8V VPP.
