CCS/OMAP-L137: SDK installation

Raheel Ahmad Khan1

Part Number: OMAP-L137

Tool/software: Code Composer Studio

//Respected Sir,

After 3 weeks of struggling with OMAP-L137.I am not able to run even a single example on this board.There is no proper information given for this board. I use to follow this link to run HELLO DSP Example http://processors.wiki.ti.com/index.php/CCS_Project_OMAP-L137_HelloDSP_DSPLINK_example it says i must install : OMAPL137_dsp_setupwin32_1_00_00_11.exe before running it. where i can find that. I am just frustrated in these 3 weeks. either TI pages are not available and there is not even a single example available on resource explorer.I am not interested in doing any software development i just wanted to input Analog Signal and digitize it and then convert it back to see it on oscilloscope.please suggest me how can i download it OMAPL137_dsp_setupwin32_1_00_00_11.exe

over 5 years ago

0 Sahin Okur over 5 years ago

TI__Mastermind 27355 points

Hello Raheel,

I'm sorry to hear its taken this long to get up and running. We are currently cleaning up our wiki pages, but this is still an ongoing process so you may come across some older pages, as you did, which can lead you in the wrong direction. I apologize for that and I understand your frustration. Hopefully we can get you going in the right direction.

DSPLink is EOL and is no longer being supported on these forums.

For new development, we strongly recommend getting started with Processor SDK. It is TI's latest software package and includes quarterly bug fixes, new features, and forum support. It can be downloaded from here: www.ti.com/.../PROCESSOR-SDK-OMAPL137

To get started with Processor SDK, please follow the Getting Started Guide here: software-dl.ti.com/.../index_overview.html

If you are looking to get started with a simple Hello World example, please refer to the "Basic Examples" section: software-dl.ti.com/.../index_overview.html

I hope this helps. If you have any questions please let me know.

Regards,
Sahin

0 Raheel Ahmad Khan1 over 5 years ago in reply to Sahin Okur

Prodigy 165 points

While running examples it shows me library for OMAPL137 supports only COFF output format. while creating new project it shows me following error. is there any suggestion for CCS version which support COFF output format

0 Sahin Okur over 4 years ago in reply to Raheel Ahmad Khan1

TI__Mastermind 27355 points

Hello,

You should set the output format as eabi (ELF).

To create the CCS example projects, please follow the steps here:
software-dl.ti.com/.../index_overview.html

Regards,
Sahin

Processors

Processors forum

CCS/OMAP-L137: SDK installation