This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

AM3359: Qt application on ICE

Expert 2585 points

Replies: 6

Views: 112

Part Number: AM3359

Respected sir,

                      I was able to run the hello world application from Linux SDK and RTOS SDK on AM3359 ICE. Now i want  to run Qt based application on AM3359 ICE as my project will be on Qt. But i am not able to find any user guide or getting started guide for running Qt based appliacation on above mentioned device. So can anybody share the Document /link/Example/Process for the same??

Regards,

Digvijay

  • Hello Digvijay,

    You can start with the Hands on with Qt examples as a getting started guide from here.

    Best regards,
    Kemal

    Note: While writing your text the Enter key will create a new paragraph with huge paragraph spacing between the lines, so that you can use Shift+Enter to create a regular new line.

  • In reply to Kemal R. Shakir:

    Hi,

                            I was able to implement the Lab1 from the link that you have provided. But i am facing the problem in Lab 2.  I am getting the below message while doing device test.

    Connecting to host...

    SSH connection failure: Server rejected password.

    Device test failed.

                         I got the ip address of board using ifconfig in console. Also i have set the password using passwd command in console. Still i am getting the same error. So my doubts are

          1. Am i getting the right ip address from ifconfig??

          2. Right now i have only connected USB cable. Do i need to connect Ethernet LAN from board to PC??

          3. Do i need a router in between (I don't want to use it though)??

    Regards,

    Digvijay

  • In reply to digvijay khambe:

    Hello Digvijay,

    Please, see this image. There is no password. Leave it blank.


    Best regards,
    Kemal

    Note: While writing your text the Enter key will create a new paragraph with huge paragraph spacing between the lines, so that you can use Shift+Enter to create a regular new line.

  • In reply to Kemal R. Shakir:

    Hi,

        I tried with blank password but it is still not working. Getting the same error

    Regards

    Digvijay

  • In reply to digvijay khambe:

    Can you connect trough ssh to that board? Try connecting it trough Ethernet LAN cable if the USB Ether is not working.

    Note: While writing your text the Enter key will create a new paragraph with huge paragraph spacing between the lines, so that you can use Shift+Enter to create a regular new line.

  • In reply to Kemal R. Shakir:

    Hello Digvijay,

    Were you able to resolve this issue?

    Best regards,
    Kemal

    Note: While writing your text the Enter key will create a new paragraph with huge paragraph spacing between the lines, so that you can use Shift+Enter to create a regular new line.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.