This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: AM3359
SDK :PROCESSOR-SDK-LINUX-AM335X V6.00
I have learned AM335x_DCAN_Driver Wiki. I can sent data by dcan bus. How to get dcan RX interrupt and data at DCAN driver?
The link you pointed to is a bit out of date. Please refer to the latest documentation:
This document shows how to use candump to receive packets. It has other information which may be useful to you.
I hope this is helpful and meets your needs.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to RonB:
In the link above there is an example of how to use an app called candump which is a utility provided in the TI SDK root file system used to read messages from the DCAN interface. This app is an open source utility and the source code is available here.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.