This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: AM5749
I have tested the the SSD example in AM5749 and the speed is 150ms. But when I migrant the model from 728*360 to 256*256, the speed is 1700ms. Is there some rules for model size?
CCS：Code Composer Studio 8.3.0
When the feature map size is smaller than 64x64, you need to set the configuration for conv2dkernelype parameter as dense (1) during the import process. This parameter is applicable on per layer basis (multiple values are expected - as many as there are layers).
This configuration will be automated during import process in Processor SDK 6.1 release expected to happen Oct end, 2019.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.