This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

66AK2H14: 66AK2H to 2x SFP+ connectors using the DS100DF410 Retimer

Intellectual 1415 points

Replies: 2

Views: 78

Part Number: 66AK2H14

Hi Team,

Posting on behalf of our customer. They are looking for a reference design on how the 10-gigabit connections are connected to the SOC. We've found earlier posts below.

https://e2e.ti.com/support/processors/f/791/t/614302?66AK2H14-10G-connection-to-switch-ic-directly

Do we have any information on how to wire the XFI lanes from the 66AK2H to 2x SFP+ connectors using the DS100DF410 Retimer?

Thanks in advance.


Jejomar

  • Hi,

    As Bill suggested on this thread:
      

    This is implemented on the RTM-BOC. Unfortunately the schematics are not publicly available, you should contact Mistral for this.

    Best Regards,
    Yordan

     


     Please make sure you read the forum guidelines first.

  • In reply to Yordan Kovachev:

    Thank you Jejomar for posting on my behalf and thank you Yordan for responding.

    I just heard back from Mistral and they said PDF versions of the schematics and drawing will be available only when the RTM-BOC is purchased.

    I have a few things to consider. Thanks again for everyone's help.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.