This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: AM3358
Tool/software: Code Composer Studio
I am using Sitara am335x EVM-SK board. I am going to develop timer interrupt in internal RAM(Bootloader) code. In that I have enable timer overflow interrupt. I tested this code on DDR its working fine, but if I add this code into bootloader its interrupt is not working. ISR is not called by system.
Is any changes or extra function called required in Internal RAM(Bootloader) code for enable interrupt.
I am not sure I understand your question. You said your application code works OK in DDR, but not in internal RAM(Bootloader) code. Sounds like you are trying to make timer interrupt work in SBL (Secondary Bootloader), am I right?
By the way, what Processor SDK RTOS version are you using right now?
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Ming Wei:
Yes I am talking about SBL and I am using AM335X_StarterWare_02_00_01_01 NAND Flash boot loader code.
merged timer interrupt code into boot code but interrupt is not generated.
In reply to Harish Samgir:
Is Startup.c file is required for SBL(Secondary Bootloader) code for running interrupt.
Because I have checked startup file in that Interrupt Vector table is assigned.
If that file required for SBL then suggest what should be the changes in startup.c file.
starup.c is part of the SBL already. To add the timer interrupt, you will need follow the steps done in TIMERUtilFreeRunInit() of C:\ti_am3_610\pdk_am335x_1_0_16\packages\ti\starterware\utils\dmtimer_utils.c AND
in TIMEUtilsInit() of C:\ti_am3_610\pdk_am335x_1_0_16\packages\ti\starterware\utils\time_utils.c.
You can download the Processor SDK RTOS 6.1.0 for AM335x from:
I issue is resolved.
Issue was I was using ble_Init.asm instead of init.asm.
Inside ble_Init.asm there is Stratup.c is not linked so IVT was not assigning now I am using init.asm its worked.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.