• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 101 subscribers
  • Views 121 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRA71XEVM: Questions about IO

Vsevolod Elantsev4
Intellectual 2165 points
Part Number: DRA71XEVM

Hi team,

My customer have questions about a DRA71XEVM board:

  1. What pins they can use as digital inputs?
  2. What pins they can use as analog inputs?
  3. What pins they can use as PWM outputs?
  4. What debugger they have to use with DRA71XEVM?
  5. Do we have a pinmux tool for DRA71xx and for EVM?

  • 0
    TI__Genius 13175 points

    Hello,

    Vsevolod Elantsev4 said:
    • What pins they can use as digital inputs?
    • What pins they can use as analog inputs?
    • What pins they can use as PWM outputs?

    Can you refer to the device data manual/datasheet or pinmux tool for this? All pins are listed there.

    Vsevolod Elantsev4 said:
    What debugger they have to use with DRA71XEVM?

    See related e2e, https://e2e.ti.com/support/processors/f/791/p/704912/2598746, 

    In a nut shell, for basic debugging you can use a low-cost JTAG, however, we suggest some of the more advanced ones (like the BH560)

    Vsevolod Elantsev4 said:
    Do we have a pinmux tool for DRA71xx and for EVM?

    Yes, we do have a tool for DRA71x, https://dev.ti.com/pinmux/, but you are probably asking for the EVM configuration to load in the tool right? I don't have it on me, will ask around to see if we have one.

    thanks,

    Alex