Part Number: TDA4VM
I have following error during the boot with custom board using SDK 07, please see the attachment. Can you please help me to figure out which DT has the issue ?
Also, I found a small error related to make u-boot which is in the rules .make , in "arm-none-linux-gnueabihf" you have missing none word which fails the make.
# Add CROSS_COMPILE and UBOOT_MACHINE for the R5export CROSS_COMPILE_ARMV7=$(LINUX_DEVKIT_PATH)/sysroots/x86_64-arago-linux/usr/bin/arm-none-linux-gnueabihf-UBOOT_MACHINE_R5=j721e_evm_r5_config
In reply to Manish Ahlawat:
So what works is the Image from 06 and dtb from 07. So device tree is not the issue , Image is the issue.
Attaching the log here.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
Hi Manish,Could you do below commands in u-boot console once and test?=> env default -f -a=> env saveRegards,Vishal
In reply to Vishal Mahaveer:
I tried by setting the env variable to default as per above but still didn't work. I just replaced the Image file from 06 Version and it was able to boot up the kernel again.
I am attaching the not working log again. My question is since it doesn't seem to be failure in RootFS (DT) where does the error in Kernel Image come from ?latest_log.txt
Hi Manish,I believe you are using the latest sysfw.itb from the 7.0 release. Can you paste the u-boot log as well?Best Regards,Keerthy
In reply to Keerthy J:
The log in the last message doesn't help ? Yes the sysfw.itb is from the 7.0 release.
U-Boot SPL 2020.01-dirty (Jun 30 2020 - 17:15:48 +0200)SYSFW ABI: 3.0 (firmware rev 0x0014 '20.04.1-v2020.04a (Terrific Lla')Reading on-board EEPROM at 0x50 failed 1Trying to boot from MMC2
So your board is booting from SD boot.The for kernel:
[ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),128k(ospi.env),128k(ospi.env.backup),1m(ospi.sysfw),-@8m(ospi.rootfs);47034000.hyperbus:512k(hbmc.tiboot3),2m(hbmc.tispl),4m(hbmc.u-boot),256k(hbmc.env),1m(hbmc.sysfw),-@8m(hbmc.rootfs) root=PARTUUID=569de07f-02 rw rootfstype=ext4 rootwaitYou are trying to boot from OSPI? Where is your Image & dtb stored?Have you tried any other boot media?Just for your information i checked the Image(kernel) size on 6.02 is around 13MB & in 7.0 it is around 16MB.Request you to give full boot log in text format & also the bootargs that you are using.- Keerthy
Hi,Below line in your failing log does not look correct[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: -1037Same line from your working log (Image from 06 and dtb from 07)[ 0.000000] Built 1 zonelists, mobility grouping off. Total pages: 13171Regards,Vishal
Manish,Can you remove all the reserved-memory nodes and try to boot with that dtb on 7.0?- Keerthy
I am booting with bootmode SD card at the moment so no OSPI. Please find the boot log attached and the bootargs.env_var.txt
i disabled the node k3-j721e-som-p0.dtsi nd &k3-arm654-base-board.dts. still doesn't work. Are these the right files to deactivate the node ?
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.