TIDEP-0088: .stl 3D of stand-off for the PCM1864CMB

Danilo A.

Part Number: TIDEP-0088

Hi Team,

A customer is requesting for the.stl 3D of stand-off for the PCM1864CMB as mentioned at time 2:05 of the video in the link below.

https://www.youtube.com/watch?v=PbrcKwgdrRY

Regards,

Danilo

over 3 years ago

0 Rex Chang over 3 years ago

TI__Guru 50170 points

Hi, Danilo,

The author of the TIDEP-0088 is a hobbyist of 3D printing and has left TI. I can't locate the stl file if there is one. You may want to ask customer to search on internet The CMB stand-off isn't a must for the functionality.

Rex

0 Danilo A. over 3 years ago in reply to Rex Chang

TI__Mastermind 24715 points

Hi Rex,

Thank you for this information.

Regards,

Danilo

0 Rex Chang over 3 years ago in reply to Danilo A.

TI__Guru 50170 points

Hi, Danillo,

I bumped into this document and saw the link in page 3 of the following document for the CMB 3-D print file. This may help you with what you want.

https://www.ti.com/lit/an/spracn7/spracn7.pdf?ts=1598273735765&ref_url=https%253A%252F%252Fwww.google.com%252F

Rex

Processors

Processors forum

TIDEP-0088: .stl 3D of stand-off for the PCM1864CMB