• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 100 subscribers
  • Views 949 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] TDA4VM: How to debug from Linux command line

Karan Saxena
Guru* 75232 points
Part Number: TDA4VM

How do I do the following when running Linux:

  1. Read / Write registers
  2. Print/dump processor related information like clocks

  • 0
    TI__Guru* 75232 points

    There is a public tool developed by one of our colleagues https://git.ti.com/cgit/k3conf/k3conf 

    Brief introduction of the tool:

    K3CONF is a Linux user-space standalone application designed to provide a quick'n easy way to dynamically diagnose Texas Instruments' K3 architecture based processors. K3CONF is intended to provide similar experience to that of OMAPCONF that runs on legacy TI platforms.

    **WARNING**: This is work in progress! Don't expect things to be complete in any dimension. Use at your own risk. And keep the reset button in reach.

    There is a README with the details on how to build this.

    After building, you can put the executable "k3conf" in the filesystem and then boot Linux.

    At the prompt you can run:

    ./k3conf --help

    This will list what the tool can do.

    You can dump clocks, do read and writes to registers.

    Regards,

    Karan