AMIC120: EnDat2.2 and EtherCAT slave.

Hitoshi Sugawara

Part Number: AMIC120

Hi Experts,

Is it possible to implement both EnDat2.2 and EtherCAT Slave with AMIC120.

Thank you for your check.
Best regards,
Hitoshi

over 3 years ago

0 Garrett Ding over 3 years ago

TI__Mastermind 43296 points

Hi Hitoshi,

Yes, please refer to https://www.ti.com/lit/ug/tidu800b/tidu800b.pdf

Regards,

Garrett

0 Hitoshi Sugawara over 3 years ago in reply to Garrett Ding

TI__Mastermind 18650 points

Hi Garrett,

Thank you so much for your prompt check and sharing the info.
It helps me a lot.

Let me ask one more question.
Does AMIC120 support both EnDat and EtherCAT slave without DDR?
Thank you for your support.

Best regards,
Hitoshi

0 Garrett Ding over 3 years ago in reply to Hitoshi Sugawara

TI__Mastermind 43296 points

Hitoshi,

The demo described in tidu800b.pdf uses DDR, but both EtherCAT and EnDat can be supported without DDR, see https://www.ti.com/lit/an/sprac45a/sprac45a.pdf

Regards,

Garrett

0 Hitoshi Sugawara over 3 years ago in reply to Garrett Ding

TI__Mastermind 18650 points

Hi Garrett,

Thank you so much for your prompt support.
The application note helps me a lot.

Best regards,
Hitoshi

Processors

Processors forum

AMIC120: EnDat2.2 and EtherCAT slave.