Does AM65 support Ethernet Switch on Linux or RTOS platform ?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Currently AM65x does not support Ethernet Switch on either Linux or RTOS but there is support provided for Dual MAC out of the box.
For Linux support, see this documentation
For RTOS support, please check the ICSS EMAC loopback application inside pdk/packages/ti/drv/emac/test. It can be built through the following steps
1. go to pdk/packages --> source pdksetupenv.sh
2. go to pdk/packages/ti/drv/emac --> make
3. Binary will be in packages/ti/binary/Emac_Icssg_TestApp
NOTE : There are plans to add support for 100Mbps Ethernet/IP on ICSSG on RTOS by Nov End 2021. Ethernet/IP can be used as a switch proxy since it supports most switch functionalities. For details, refer to the User Guide and Datasheet
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs and
embedded processors, along with software, tools and the industry’s largest sales/support staff.