Hi all
We are using MT41K512M16VRP-107 IT:P in our TI DRA718 board. We would require gel file and the u-boot parameters that are user calculated for doing DDR3 RAM initialisation in SPL.
We checked the data sheet of the part number - ddr3l_8gb_x16_twindie_v00h_it.pdf. We tried to use EMIF_RegisterConfig.xlsx - tool from TI. But the datasheet is not having complete information we require to generate the required register entries
We are following SPRA36e (AM57x, DRA7x, and TDA2x EMIF Tools) Application Report for the same. We Downloaded the SPRA36e.zip as in the document.