HELLO, I use DAC38RF89 with the mode LMFSHd = 82380 1X，the FPGA is XC7K410T-2FFG900, NOW the link of jesd204b is ok, but the output of
DAC wave form is incorrect ， so I doubt that the sequence of the data I arranged in FPGA endding is wrong . Could you show me the correct data sequence
of FPGA.
Hi,
You may follow the frame format of the 82380 shown on Table 25 of the datasheet.
You will need to make sure that the starter multi-frame of your JESD204 data stream matches the starting frame of the LMFS shown below. There are pattern generator checker described in the datasheet for you to check the pattern is send correctly or not. Thank you.
