Hi experts
Is there any power consumption data available for device operation in the ADC/DAC half-rate modes?
All of the data in table 8.10 is for the full-rate modes.
Thanks!
Jim B
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi experts
Is there any power consumption data available for device operation in the ADC/DAC half-rate modes?
All of the data in table 8.10 is for the full-rate modes.
Thanks!
Jim B
Hi Jim.
I'm checking with our product development team for power consumption in half rate mode. They might have an estimate for this. I will let you know as soon as I hear from them.
Regards,
Vijay
Hi Jim,
There is no power consumption data available for half rate modes. But characterization team can setup an EVM with external supplies and measure this. We expect to have this data by end of this month. I will reach out to you when I get this data.
Regards,
Vijay
Hi Vijay
Can you share the required register details, or a configuration script to enable the half rate modes on the evaluation board?
Thanks,
Jim Brinkhurst
Hi Vijay
Can you provide a .py script similar to the normal board startup script, but with the RX and TX in half rate sampling modes?
Thanks!
Jim B
Hi Jim,
As AFE7700 EVM EVM control software is not public, let's take this discussion offline. I will email you.
Regards,
Vijay