• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 10 subscribers
  • Views 297 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMX8410LEVM: LMX8410LEVM it is possible to change the output power of the LO signal?

Iordan Pentchev
Prodigy 40 points
Part Number: LMX8410LEVM

Dear community,
it works good now. I want to know it possible to change the output power of the LO signal? I which register can I change the output power, if this is possible? I did not find information in the user guide.
Best regards,
Iordan Pentchev.

  • 0
    TI__Genius 12560 points

    Hi,

    As mentioned in the user guide, for LO output port to LO_P/M R54 and R55 needs to be place to achieve maximum output power. It may not have the software control output power option. If you want, can try to tweak on the R54 and R55 resistors and see how the output power is varying.

    Thanks!

    Regards,

    Ajeet Pal