This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AFE7950: DAC to ADC loopback is possible?

Part Number: AFE7950

HI,

I need to check if DAC to ADC loopback test is possible.

I found useTxCalib among the list of calibration related parameters but didnot find TX to RX loopback enable register in TRM.

If TX to RX loopback is possible in normal mode not in calibration mode, let me know which register I can control and the where the loopback is activated.

Regards,