This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS54T02EVM: Connecting Xilinx FPGA through the TI FMC ADC adapter

Part Number: ADS54T02EVM
Other Parts Discussed in Thread: ADS54T02


I have an ADS54T02EVM Rev A TI ADC. I also have a FMC ADC Adapter Rev D from TI. I am looking for any suitable low cost FPGAs from Xilinx that would suit the interface without any extra connectors or serialisers. I have referred to some forum posts about problems with interfacing specific Xilinx FPGAs considering FMC revision constrains. So, I would kindly request you to help me out with any FPGA models that would suit the FMC-ADC adapter Revision D. Also refer to the photo attached. It would be better if you could also help me with the interfacing procedure and connector diagrams. 

Thanks & Regards,

Adithya N