• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 11 subscribers
  • Views 386 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMX8410LEVM: How to set LMX8410LEVM GUI

chen weihuang
Prodigy 10 points
Part Number: LMX8410LEVM

Hi, I have some problems in this gui. How should I set up "Main Setup" correctly? I don't know when to tick SIGCHAIN_PD or PLL_PD

  • 0
    TI__Guru* 95190 points

    Hi Weihuang,

    Suggest get it started using EVM default setting. Default configuration --> Default Mode 2018-11-29.

    When PLL_PD = 1, the internal LO will be powered down.

    When SIGCHAIN_PD = 1, the demodulator is powered down.