Hello!
In 9.3.3.3 paragraph of slose45a-rtp-final.pdf mentioned delay blocks.
Could you please provide information on configuring it separately for all TX and RX channels?
Thanks!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello!
In 9.3.3.3 paragraph of slose45a-rtp-final.pdf mentioned delay blocks.
Could you please provide information on configuring it separately for all TX and RX channels?
Thanks!
Hi Oleksii,
I am checking with our team on this and will get back to you by Friday.
Regards,
David Chaparro
Hi Oleksii,
I have updated Register_Set document in 'Software and User's Guide' section of AFE77xx secure folder. You can refer to below registers in TX TOP Register Map for TX chain delay blocks configuration:
130h, 131h, 132h, 140h, 141h and 142h.
As mentioned in the datasheet, delay blocks are only available in TX chains and not in RX chains.
Regards,
Vijay