Hello everybody,
I'm planning the AFE7900 to measure the frequency spectrum of the DUT and to perform the Time Domain Analysis of the DUT like a VNA.
To do this, I would need to measure the initial phase of the AFE internal path immediately after measuring the signal passing through the DUT at each frequency.
It could be accomplished by bypassing the SRX data of the JESD block to the STX and measuring the Tx(DAC) signal directly, though,
After executing the "AFE.deviceBringup()" function, Is it possible to bypass the SRX - STX on the JESD block and acquire the Tx(DAC) signal immediately after acquiring the RF signal between the Tx - Rx ports of the AFE?
Regards,
