Hi TI support,
I would like to know in which register address the sleep mode in 3.1.2 Start-Up GPIO Status is programmed.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi TI support,
I would like to know in which register address the sleep mode in 3.1.2 Start-Up GPIO Status is programmed.
Hi Wanrui,
I believe the registers that you are looking for are registers 0x27 and 0x28 of page PLLDIG_P0, see page 186 of the Register Set document. These registers control which blocks are put to sleep when SLEEP goes high.
Regards,
David Chaparro