• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 11 subscribers
  • Views 105 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMX2824EPEVM: LMX2824 full assist mode of tuning

John Haraguchi
Prodigy 60 points
Part Number: LMX2824EPEVM
Other Parts Discussed in Thread: LMX2595

Tool/software:

The 'full assist' mode of tuning the LMX2824 skips calibration and requires programming a number of different values: VCO_SEL, VCO_CAPCODE, VCODACISET, DBLR1_PD, DBLR_AMP_CAPCTRL, DBLR_AMP_DACCTRL, DBLR_PREGEN_AMP_CAPCTRL, DBLR_PREGEN_AMP_DACCTRL

I don't see how to read/write many of these register values in the datasheet I received (i.e. VCODACISET).

I've implemented the 'full assist' mode on the LMX2595 and this looks similar but that datasheet included the entire register map and more details on tuning in this mode.

Can TI provide the steps for creating the lookup table for 'full assist' mode and then steps on how to tune in this mode?

Thanks,
John