• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 9 subscribers
  • Views 179 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TRF3702 on wired application

Viktor Michel
Prodigy 110 points
Other Parts Discussed in Thread: TRF3710

Hi,

i have a customer enquiry, which could be solved by using the TRF3702 (I/Q modulator) and TRF3710 as demodulator. Can I tie the output on a STP cabel (wired instead of wireless)?

Could i reach a distance of about 300 feet?

  • 0
    TI__Intellectual 1650 points

    Viktor,

    Thanks for inquiry.  I'd probably need a little description of the problem to answer this fully.

    Below are some general comments.

    The TRF3702 is a 1.5G to 2.5G I/Q modulator.  At these frequencies I'd recommend some fairly decent SMA cable assembly (or equivalent shielding cable) if performance is a concern.  For a long (300ft) cable run at 1.5G to 2.5G there will be significant attenuation loss.  To counter attack that you may need a gain stage.

    Chris

  • 0 in reply to Chris Pearson
    Prodigy 110 points

    The application will need a data throughput of about 100 Mbit/sec. Lower frequencys are also possible. I think the TRF3701 would be a better choice to modulate the Data.

    Is there a possibility, with or without a gain stage, to use unshieldet 300ft cable?

    Viktor