Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 10 subscribers
  • Views 721 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

delay time considerations

Robert Dugour
Prodigy 50 points
Other Parts Discussed in Thread: TRF371125EVM
For indoor positioning we need a demodulator with a guaranteed propagation delay within 10ps accuracy ( delaymay be much longer as long as it is Always the same time).

Will the TRF371125EVM answer for our needs or are there better solutions available?

Best regards

Robert Dugour

Cinnovate

  • 0
    TI__Mastermind 18095 points

    Yes, I think the TRF3711 will suffice for this application.  Check out figure 40 in the D/S which illustrates relative group delay performance.  That data was taken over multiple units and the results were very consistent.  If you keep the integrated filter BW large or in bypass mode and you keep the signal at relatively low frequencies then the group delay variation is consistent.

    --RJH