AFE7920EVM: How to configure the AFE7920EVM via iGUI only (without using the .py scripts provided)

Chan100

Part Number: AFE7920EVM

Hi everyone,

I am working with AFE7920EVM. To configure the EVM for a mode, along with establishing connection between PC and EVM, we need to use Latte. Is there any chance that all of what is necessary to configure AFE, can be done via iGui?

Can someone suggest what can be done?

Thanks in advance,

-Chan100

over 3 years ago

0 Vijayendra Varma Siddamsetty over 3 years ago

TI__Genius 10505 points

Hi Chan100,

We plan to support configuration through iGUI in future. But as of now, it's not supported and python scripts provided must be used.

Regards,

Vijay

0 Chan100 over 3 years ago in reply to Vijayendra Varma Siddamsetty

Genius 3040 points

Hi Vijay,

Is there a way to run these python scripts outside latte, on Windows?

-Chandrasekhar DVS

0 Vijayendra Varma Siddamsetty over 3 years ago in reply to Chan100

TI__Genius 10505 points

Hi Chandrasekhar,

Python scripts in latte can be run only within the latte framework. To configure AFE without using latte, config file (or log file) generated by latte for that particular mode has to be used.

Refer to section 3 in Latte user guide for details on log file generation and section 9 in configuration guide (SBAA417) for bring-up flow with log file.

Regards,

Vijay

RF & microwave

RF & microwave forum

AFE7920EVM: How to configure the AFE7920EVM via iGUI only (without using the .py scripts provided)