Dear Sir or Madam
As the titles , Need your help to get further information in detail.
Sincerely
Kenny
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear Sir or Madam
As the titles , Need your help to get further information in detail.
Sincerely
Kenny
Dear Kang
The requested application of Both parts had completed since you gave us your feedbacks.
Thank for your help. By the way , Could you provide Both part's reference prices ?
Kenny
Dear Kang
Sorry , I can't find out below part's datasheet from Murata. Could you help me to indicate the correct part number ? the file name of EVM is DC101A_AFE7920EVM-LYR. the file name of BOM is DC101A3_AFE7920EVM-BOM.
Kenny
Quantity | Reference | Note | Value | Part Number | Manufacturer |
6 | T1,T2,T3,T4,T5,T6 | LDB182G8BAAEA051TEMP | LDB182G8BAAEA051TEMP | Murata | |
4 | T7,T8,T9,T10 | LDB182G8AAAEA050TEMP | LDB182G8AAAEA050TEMP | Murata |
Hi Kenny,
I have asked Murata Taiwan to reach out to you. I will private message you to get your email/contact information. Thanks.
Dear Kang Hsia
So far , I am doing the repeater comparison between traditional analog repeater , traditional digital repeater , Wideband digital repeater (AEF serial ).
Could you suggest us Ti related IC for above solution ?
Sincerely
Kenny
Wideband repeater |
Traditional digital repeater |
Traditional Analog repeater |
|
Cost |
High (around 100USD) |
Middle (TBD 60-70 USD) |
Low ( TBD 20-30 ) |
HW complex |
Easy ( high integration ) |
Middle ( discrete solution ) |
High |
SW complex |
Easy ( No FPGA/ASIC requirement) |
High ( more SW effort ) |
Middle |
Manufacture |
Easy (high integration ) |
High ( discrete solution ) |
high |
Calibration & test |
Chipset vender suggest |
RD define |
RD define |
Development time |
short |
Long |
Long |
Band variation |
Flexible ( Cover 0.7GHz ~ 5.2GHz) |
Fix |
Fix |
Hi Kenny,
We are currently discussing this with you via email. Let's close this thread and move to private discussion. Thanks.
-Kang