LMX8410L: VCO Calibration over temp

Michael T Schneider

Part Number: LMX8410L

Team,

is there any guidance or specification on the max temperature difference vs. initial calibration temp where the calibration is expected to hold?

over 4 years ago

0 Hao Z over 4 years ago

TI__Mastermind 18070 points

Michael,

Dean or Noel will get back to you soon.

Regards,

Hao

0 Noel Fung over 4 years ago in reply to Hao Z

TI__Guru* 81620 points

Hi Michael,

Allowable temperature drift when VCO is not re-calibrated is 125C. That is, if you calibrate the VCO at 85C, it will stay lock even if the temperature has change to -40C.

RF & microwave

RF & microwave forum

LMX8410L: VCO Calibration over temp