This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Failure to receive the correct Preamble

Prodigy 10 points

Replies: 1

Views: 78

HI
I'm using a USRP to receive a signal on the 900 MHz frequency band, but the signal received after demodulation has no preamble. Does anyone know what the cause is?
transmitter information:
Baud rate=10K
modulation = BFSK
deviation = 100K
channel spacing = 350K

1 Reply

  • Guru 51825 points

    Which TI device are you using?

    Siri

    I'm on vacation until August 10th. Sorry for the inconvenience this might cause. Feel free to open up a new thread if you find questions are not getting picked up by someone else (remember to link back to the old thread)

     

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.