Hello,
My customer wants to design a custom board using the ADC32RF83 as below.
Can the ADC32RF83 be used for the above application?
Is there a issue that is predicted?
Regards,
JH
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
My customer wants to design a custom board using the ADC32RF83 as below.
Can the ADC32RF83 be used for the above application?
Is there a issue that is predicted?
Regards,
JH
Hi,
The device can support this application. I'm assuming that they will have a anti-alias filter at each of the inputs.
Both channels of device #2 can be configured in Nyq Zone 2 whereas channel A in device #1 will be configured in Nyq Zone 1 and channel B in Nyq Zone 2.
Regards,
satish.