Dear,
With fdc1004, Is it posssible read data registers from 0x00 to 0x07 address, with only read command?
(I read first address 0x00, then I perform a read multiple data until the address 0x07)
Best regards.
Leonardo.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear,
With fdc1004, Is it posssible read data registers from 0x00 to 0x07 address, with only read command?
(I read first address 0x00, then I perform a read multiple data until the address 0x07)
Best regards.
Leonardo.