IWR1443BOOST: 12xx_fr4_cz_lib worklib

yunjiang shi1

Part Number: IWR1443BOOST
Other Parts Discussed in Thread: IWR1443, IWR1642, AWR1642, TIDA-01570

Dear,I have download the files (http://www.ti.com/lit/zip/sprr253).When i open Database.7z with allegro,some errors report missing library.

I check the cds.lib and find the below text:

DEFINE 12xx_fr4_cz_lib worklib
INCLUDE $CONCEPT_INST_DIR/share/cdssetup/cds.lib
INCLUDE W:/ADW_Library/reflib/model_sym/cds.lib

Can you give me the library(W:/ADW_Library/reflib/model_sym/cds.lib)?

over 6 years ago

0 Radio-Joe over 6 years ago

TI__Mastermind 37500 points

cds.lib - points to internal TI library files,

DEFINE ti_socket ./ti_socket
DEFINE ti_misc ./ti_misc
DEFINE ti_template ./ti_template
DEFINE ti_test_point ./ti_test_point
DEFINE ti_connector ./ti_connector
DEFINE ti_relay ./ti_relay
DEFINE ti_contactor ./ti_contactor
DEFINE ti_pcb_pattern ./ti_pcb_pattern
DEFINE ti_switch ./ti_switch
DEFINE ti_filter ./ti_filter
DEFINE ti_ic ./ti_ic
DEFINE ti_transistor ./ti_transistor
DEFINE ti_transformer ./ti_transformer
DEFINE ti_oscillator_crystal ./ti_oscillator_crystal
DEFINE ti_discrete ./ti_discrete
DEFINE ti_jumper ./ti_jumper
DEFINE ti_led ./ti_led

I am asking for permission to send the library files. If you want to make progress, you would use a standard component libraray
for all but the IWR1443 device. All of the other devices, are stanadrd released part.

Regards,
Joe Quintal

0 yunjiang shi1 over 6 years ago in reply to Radio-Joe

Prodigy 60 points

Thanks,Joe Quintal.I hope you can get the permission to send the library files to me.Looking forward to your good news.

0 Radio-Joe over 6 years ago in reply to yunjiang shi1

TI__Mastermind 37500 points

Hello,

We are not able to release the internal TI libraries, as these contain parts that are used for testing. In talking with other application engineers, customers have

taken the Cadence package, and the Bill of materials, and cross referenced the TI specific parts to standard parts. That is our recommendation for using the Cadence package.

As an alternate plan, we have a schematic and layout of the IWR1642 product that is being developed in Altium. We could provide that within 2 weeks if that is useful.

We apologize the TI Cadence complete library is not available for your use.

Regards,

Joe Quintal

0 yunjiang shi1 over 6 years ago

Prodigy 60 points

Dear,

I want to know whether the IWR1642 product that is being developed in Altium is ready? The second question is whether AWR1642 can be replaced by IWR1642 in TI Designs: TIDA-01570 ?

Best Regards

Yunjiang Shi

At 2018-02-24 01:24:28, "Radio-Joe" <bounce-29081@mail.e2e.ti.com> wrote:

A Message from the TI E2E™ Community

Radio-Joe replied to IWR1443BOOST: 12xx_fr4_cz_lib worklib.

Hello,

We are not able to release the internal TI libraries, as these contain parts that are used for testing. In talking with other application engineers, customers have

taken the Cadence package, and the Bill of materials, and cross referenced the TI specific parts to standard parts. That is our recommendation for using the Cadence package.

As an alternate plan, we have a schematic and layout of the IWR1642 product that is being developed in Altium. We could provide that within 2 weeks if that is useful.

We apologize the TI Cadence complete library is not available for your use.

Regards,

Joe Quintal

You received this notification because you subscribed to the forum. To unsubscribe from only this thread, go here.

Flag this post as spam/abuse.

0 Radio-Joe over 6 years ago in reply to yunjiang shi1

TI__Mastermind 37500 points

Hello
The Altium 1642 EVM package is being released in the 2nd quarter. The IWR1642 or AWR1642 have the same signalling. One of the differences is the testing temperature. The AWR devices are automotive qualified to 125C, while the IWR devices are industrial qualified to 105C.
Regards,
Joe Quintal

Sensors

Sensors forum

IWR1443BOOST: 12xx_fr4_cz_lib worklib