This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR1443: Samples programming

Part Number: IWR1443
Other Parts Discussed in Thread: UNIFLASH,

Hi Support,

in order to properly manage and program IWR1443 products, can you kindly help me replying to the following questions?

  1. What tools (SW and HW) we need to load a software to the XI1443QGABL?
  2. What interfaces are required for software loading (JTAG, UART, … )?
  3. What interfaces and signals need to be connected for proper operation?

 Thanks and regards,

Alberto

 

  • Hi Alberto,

    We use uniflash tool (TI.com/tool/uniflash) to program the QSPI flash. Upon power on, IWR device load the image from flash.
    The images to load is mss and bss, compiled using mmwave SDK.
    IWR1443 support SPI, I2C, UART and JTAG interface and GPIOs.
    UART port is used in mmw demo to send the radar configuration and receive logger message and data output.
    JTAG can be used for debug purpose.

    Please refer to the mmwaveSDK (www.ti.com/.../mmwave-sdk documents and IWR1443BOOST EVM user guide(www.ti.com/.../swru518)

    Regards,
    Michelle