OPT8241: 3D CAD Model

Morgan Riffe

Part Number: OPT8241

My lab has ordered this part and would like to use a model of it for simulations. Is there an existing 3D model that you could send or link to?

over 5 years ago

0 Nithin Jose over 5 years ago

TI__Intellectual 1660 points

Hi Morgan,

If you are looking for a system estimator , kindly take a look at the following post.

e2e.ti.com/.../2551305

Regards
Nithin

0 Oliver Landine - WEBENCH® Design Center over 5 years ago

TI__Expert 3055 points

Hi Morgan,

Thanks for contacting TI. Here is a link to the STEP model you requested: https://webench.ti.com/cad/dlbxl.cgi/newstep/NBN0048A.stp.

Regards,

Oliver

0 Morgan Riffe over 5 years ago in reply to Oliver Landine - WEBENCH® Design Center

Prodigy 20 points

I'm trying to get the part shown in the picture on this page: www.ti.com/.../opt8241-cdk-evm

0 Subhash Chandra Sadhu over 5 years ago in reply to Morgan Riffe

TI__Expert 3800 points

Hi Morgan!

I think you are requesting a CAD model of the whole evaluation module. As this is an evaluation module, we don't have the CAD files for the entire assembly. You should be able to extract the PCB mechanical details from the BRD files in the design files package.

Regards,
Subhash

Sensors

Sensors forum

OPT8241: 3D CAD Model